BRAND NEW RECYCLING LINE AGGLOMERATION WATER RING PELLETIZIN

BRAND NEW RECYCLING LINE AGGLOMERATION WATER RING PELLETIZING LINE POY/FDY.FILM WASTE

 

Project PTC200 agglomeration water ring pelletizing line poy/fdy.film waste…

 

Raw material & formulation

 

Flexible material with/without paint/ink,Thickness: up to 500um,Bulk Density: 0.08~0.3 g/ cm³,Moisture Residual: ≦5% by weight

 

Output capacity 1000-1100kg/h ,(based on raw material condition and water content)

 

Description final product  pellet, Granule size: Ф3*3mm,Moisture content 1-2% ,stacking density: 0.5-0.8 g/cm³ ,

 

Power supply  Supply voltage: 3×380V+N+PE; Voltage tolerance: +5%/-5%; Control voltage: 24VDC+220VAC; Frequency: 50HZ

 

Lubrication oil: Sinopec, Exxon mobil

 

Energy consumption Installation power 582KW

 

Actual consumption 60-70%

 

Cooling Water 0.15~0.2Mpa, ～1M3/hr, Inflow temperature: max. 25℃

 

Manpower 2 Persons..

 

Scope  of Supply :

  

1 Belt conveyor 1 set

 

2 Agglomerator GGT1300 1 set

 

3 PTC 200/34 Single screw extruder 1 set  & 408 74280,Vacuum exhaust device 1 set

 

4 2000 Double column large area,screen changer+Hydraulic station 1 set

 

5 Die head 1set

 

6 Water tank 1set

 

7 Strong-air dryer 1set

 

8 Pelletizer 1set

 

9 Vibrator 1set

 

10 Control cabinet 1 set

 

11 Simens PLC+Touch screen 1 set

 

Total amount in FOB Shanghai Port 150,000 USD.

 

Conveying plastic waste such as

film, silk, woven bags, etc. to the

pelletizer; the feeding speed of

the conveyor belt is fully

automatic according to the filling

degree of the crushing drum.

Controlled by the agglomerator

current.

 

Ring PVC conveyor belt with

T-shaped teeth, acid and alkali

resistant

Feeding power: 2.2Kw

L*W: 5500mm*800mm

Material of belt: PVC

Equipped with wheels

Equipped with tightening device

 

Speed controlled by inverter:

Inverter brand: ABB

 

Synch running with agglomerator

 

Agglomerator

The rotating blade of the

granulator cuts off the incoming

material to achieve the crushing

effect. The frictional heating

caused by the high-speed

rotating blades will heat the

material and ensure that the

material shrinks before the

melting point. The optimally

designed diversion structure can

effectively compact the material

and directly feed it into the

extruder screw, while the wall of

the pelletizer barrel blocks the

backflow material. It integrates

crushing, drying and compaction

to ensure output.

Cylinder wall material: 304

Crush and pellet the material

Hydraulic lid opening, hydraulic

lifting, power from hydraulic

station

Base water cooling (with water

cooling system) + air cooling

Double-layer cylinder, air-cooled,

1.5kw fan

 

Technical parameters:

 

Crushing cylinder volume: 1060L

Crushing cylinder diameter:

1300mm

Drive motor power: 132KW AC

1500rpm

Moving knife: 9 Blade material:

SHH

Fixed Knife: 18 Blade Material:

SHH

Comes with visibility hatch and

flashlight

Temperature measurement:

Thermocouple

The upper lid of the pellet barrel

is opened: hydraulic lid opening

with shutdown protection

Temperature control is divided

into manual and automatic

modes, with over-temperature

alarm system

Single

screw

extruder-

Features:

Our specially designed single

screw extruders rely on physical

shearing to "softly melt"

pre-compacted materials. For

different materials, screw

compression ratio,

length-diameter ratio, shearing,

mixing, and exhaust will be

designed accordingly. According

to customer requirements, the

barrel and screw can be sprayed

or welded with alloys to provide

service life.